Re: [NTLK] 2x00 Jaggies and Cover?

From: Sonny Hung <sonnyhung_at_gmail.com>
Date: Tue Apr 17 2007 - 22:18:17 EDT

On 4/17/07, Puckdropper <puckdropper@yahoo.com> wrote:
>
> Looking at the cover, I'm wondering if it might be the
> cause of the jaggies. Forces would tend to get
> transfered to the outside, putting pressures on the
> digitizer. Right now, I've got the cover off and I'll
> try it again in a few hours to see if some of the
> pressures have relieved and the jaggies have lessened.

It's interesting that you mention this.
I noticed that if you put a fresh Cover on the MP2x00 that it will not
close.
It stays open about 1/4" so it is flexing the case for sure on the left
side.
I'm unsure as to the issue as the right side is where you shave off the
case?
Am I right? I forget having not re-read the procedure is awhile...

BTW I don't use a cover usually when I use my Newton either... and I don't
have any Jaggies on my primary Newton.

-- 
God bless,
Sonny Hung
the Hung Family
-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
Received on Tue Apr 17 22:18:22 2007

This archive was generated by hypermail 2.1.8 : Tue Apr 17 2007 - 23:30:01 EDT