From: Sonny Hung (sonnyhung_at_gmail.com)
Date: Tue Jan 18 2005 - 07:55:21 PST
On Tue, 18 Jan 2005 09:20:23 -0500, varistor_at_verizon.net
<varistor_at_verizon.net> wrote:
> On Jan 16, 2005, at 10:11 PM, Mark Jozaitis wrote:
> > Any Ideas? Please let me know!
Let me preface this first by saying that:
1) I hope someone gets the documentation for these units and shares
them with the rest of the community.
2) I contacted Harris and they informed me that that division was sold
to Fluke (I recalled something abouit this awhile back). I contacted
Fluke and was albe to speak with a technician that was there since the
beginning when the SuperTech 2000 was being beta tested...
Unfortunately no technical data could be found as most of it was
already placed int eh DUMPSTERS and if they had any it was shipped to
their Washington state storage facility.
Recently a few purchased two seperate units form another auction
lister on eBay and fortunately this person did test those two units.
IIIRC she mentioned to me that they tested these units with 6V power
and I think it was the two outer contact (of the four inside the
battery compartment.
***** I AM NOT TO BE HELD RESPONSIBLE IF ANY OF THIS INFO IS INCORRECT
AND CAN NOT BE LIABLE FOR ANY DAMAGE IF YOU TRY ANYTHING I MENTION
*****
I took one unit I purchased apart to see and I believe with the unit
facing down the far left contact is the GND [Neg] and likely the far
right id the [Pos]. Please do some further investigation yourself
before you try anything.
SIDE NOTE: It seems those last two units were special. The first one
was sold with a hand strap and the second came with the protective
rubber boot.
-- God bless, Sonny Hung the Hung Family -- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Tue Jan 18 2005 - 22:30:01 PST