From: hellsop_at_ninehells.com
Date: Tue Apr 05 2005 - 20:48:29 PDT
On Tue, Apr 05, 2005 at 09:37:10PM -0400, Don V. Zahniser wrote:
> Thanks to the several replies that I got on this subject. One person
> sent me a link off-list to:
>
> http://philly.unna.org/view.php?/drivers/printer/2x00epson
>
> Which is a driver for Epson ESC P2 printers. The S2tylus 740 is supposed
> to be compatible (at least the manual says it is an ESC P2 printer).
>
> Unfortunately, using both my MP130 and MP2100, I get either no apparent
> output to the printer accompanied by a neverending dialog box on the
> Newton side, or a flashing light on the printer with no output. I am
> using a standard IWII cable from the MP130, the same one that I use to
> print from my PB1400 to the Epson, so cabling is not an issue.
Hardware FAQ says the epson driver doesn't work.
--
40. I will be neither chivalrous nor sporting. If I have an unstoppable
superweapon, I will use it as early and as often as possible instead of
keeping it in reserve.
--Peter Anspach's list of things to do as an Evil Overlord
--
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Tue Apr 05 2005 - 22:00:01 PDT