From: Martin Joseph (martyNT_at_barknaturalpet.com)
Date: Fri Aug 27 2004 - 13:52:45 PDT
On Aug 27, 2004, at 1:32 PM, Steele Campbell wrote:
> PCBMan, just an update. I tried the keyboard on an eMate (not sure if
> that would even work) and got no response. Any other ideas...
Assuming both your systems have the right system updates and you have
tried a soft rest prior to hooking up the keyboard, I am going to say
it looks like your keyboard might be wacky.
Take a very careful look at the plug on the keyboard and the wire too...
If those all look good, it might be something inside the keyboard.
Tough to say, but since it worked occasionally it sounds like it might
just be a cold solder joint or a partial (intermittent short or more
likely open).
HTH
Marty
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries Official Newton FAQ: http://www.chuma.org/newton/faq/ WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/
This archive was generated by hypermail 2.1.5 : Fri Aug 27 2004 - 15:00:02 PDT