From: Martin Joseph (martyNT_at_barknaturalpet.com)
Date: Sat Apr 05 2003 - 14:31:21 PST
On Saturday, April 5, 2003, at 11:58 AM, Anthony Velasco wrote:
> I'll admit that I am not an electronics wiz. But, the specs of the
> zener
> diodes that Digikey carries don't closely match those of the type that
> Mr. PCBman suggested. I wouldn't know how far one could deviate from
> those particular specs and still be safely within the specific
> tolerances required by the eMate's circuits. Any cross reference tables
> that I could google only came up with distributors listing bulk
> quantities available for purchase.=20
>
> Still remaining optimistic...would hate to see another one of our
> "green
> friends" drop out of service!
This page here seems to offer the part that Dave recommended(they offer
samples too).
http://www.onsemi.com/productSummary/0,4317,1SMB5924B,00.html
I don't know this company, so good luck
Marty
-- This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries List FAQ/Etiquette/Terms: http://www.newtontalk.net/faq.html Official Newton FAQ: http://www.chuma.org/newton/faq/
This archive was generated by hypermail 2.1.5 : Sat Apr 05 2003 - 20:52:25 PST