From: David Humphreys (pcbman_at_ix.netcom.com)
Date: Sun Sep 29 2002 - 11:37:46 PDT
Hi Frank,
The first part is the actuator button for the display. It fits under
the left hand side of the display, near the left hinge, on the main
body.
The second part is the light pipe for the power led and is located top
right near the handle.
Hope this helps,
PCBman
On Sunday, September 29, 2002, at 01:13 PM, Frank Gruendel wrote:
>
> Hi all,
>
> due to momentarily missing attention I managed to have two
> parts
> fall out of an eMate when I took it apart. Could those of
> you who
> have taken apart one already please have a look at the
> following
> two images and try to explain where these parts belong?
>
> http://www.pda-soft.de/whereDoesThatBelong1.jpg
>
> This part is dark green and about 9.5 x 8.5 x 6 millimeters
> (0.38 x 0.34 x 0.24 inches).
>
> http://www.pda-soft.de/whereDoesThatBelong2.jpg
>
> This part is transparent, about 24,8 millimeters (0.59
> inches)
> in diameter and about 17.7 millimeters (0.7 inches) long.
>
> Thanks a lot!
>
> Frank
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.chuma.org/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net/
This archive was generated by hypermail 2.1.5 : Mon May 26 2003 - 12:59:23 PDT
