Here is the site with "BOTH" drivers you need!!!.......
http://www.ff.iij4u.or.jp/~ngc/eng/newtwave.htm
I use the WaveLAN "Bronze" card and it's fine, Ive read the postings,
but It just works!!.....Jeff
On Wednesday, June 12, 2002, at 05:44 PM, Bernie A. Goltermann wrote:
>
> Darius wrote:
>
>> After defining the password, make sure to press the top Lock-symbol
>> (Password) and write this value as a hexadeimal-code into the
>> corresponding field (WEP-key) of your WaveLan-Setup on your Newton
>> (all chars in UPPERCASE).
>>
>> Key-code: ******** (as generated by your AirPort Basestation)
>>
>
> OK I'm still having problems with all this configuation. By Key code do
> you mean the code you get from the Airpot Admin Utility menu selection
> 'Base Station' and 'Equivalent Network Password' I'm running Airport
> 2.0.2 on an older Base Station.
>
>> After I entered my AirPort network name and
>>> re-opened the setup, I noticed that the Wep key had the same value as
>>> the
>>> SSID.
>>
> I still see the same problem as Laurent above.
>
>> I discovered that I can successfully change the SSID/WEP Keys to
>> differing
>> values if I make the change through the Worksite's "802.11b WaveLAN
>> setup".
>>
> I'm using the WorkSite slip but it makes no difference. Ahrrrggg!!!
>
> Bernie
>
>
> --
> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
> This is the NewtonTalk mailing list - http://www.newtontalk.net
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:02:13 EDT