Re: [NTLK] bad backups resolved!?!

From: Fred (tfbiii_at_nbscomputers.net)
Date: Tue Jan 22 2002 - 12:11:11 EST


That was me - I tried both Xon/Xoff and Hardware flow control and found
that the port went back to Xon/Xoff automatically. You also need to use
the advanced setting and turn for send and recieve buffers all the way
down. This allowed me to make 57.6 connections for BU and Sync from my
2100.

Fred

-----Original Message-----
From: Brian [mailto:bmcewen_at_mediaone.net]
Sent: Tuesday, January 22, 2002 7:19 AM
To: newtontalk_at_newtontalk.net
Subject: Re: [NTLK] bad backups resolved!?!

>Other things I've found that can help. I don't know if
>they're real or imagined, but in any case, they tend to
>make me feel better. ;)

And just a day or so ago, someone mentioned turning flow control on for
the
serial port helped. I don't think they indicated hardware vs software
flow
control, but software flow control is usually off, so that's what I'd
try
turning on, first.

B

--=20
This is the Newtontalk mailinglist - http://www.newtontalk.net
To unsubscribe or manage: visit the above link or
        mailto:newtontalk-request_at_newtontalk.net?Subject=3Dunsubscribe

-- 
This is the Newtontalk mailinglist - http://www.newtontalk.net
To unsubscribe or manage: visit the above link or
	mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe



This archive was generated by hypermail 2.1.2 : Fri Feb 01 2002 - 16:02:59 EST