RAV wrote:
> then your saying the rom chips come out? It was a chip set of 3 or 4 that
side in and out, I figured it was the ram because it worked without it.
>
> Victor Rehorst wrote:
>
> > On Tue, 5 Sep 2000, RAV wrote:
> >
> > > The reason they are sent off is that no Dr. Newton would not sell you
> > > the ram by itself , trust me I HAVE DONE THIS WITH NO PROBELMS, its
the
> > > same as the emate, just pop it in.
> >
> > The 2x00 RAM and flash chips are soldered onto the motherboard. To
replace
> > them would involve either very fine SMD(sp?) soldering skills or
replacing
> > the mainboard. The daughtercard in the 2x00 holds the system ROM:
NewtonOS
> > 2.1.
I doubt an MP will work with either RAM or ROM missing...
But Victor is right; the RAM chips in an MP2k are soldered in; the ROM is on
an SO-DIMM (much like in the eMate).
,xtG
..tsooJ
-- Joost van de Griek Applications Developer Yacht ICT http://www.yachtgroup.com/*************************************** NewtonTalk brought to you by:
EVOTE.COM -- the ESPN of politics on the Internet! All the players, all the news, and the hottest analysis and features (plus 'toons!) anywhere.... visit http://www.evote.com today!
*************************************** Need Subscribe/Unsubscribe info?
Visit the NewtonTalk section at http://www.planetnewton.com
This archive was generated by hypermail 2b29 : Tue Sep 12 2000 - 00:00:07 CDT