Re: [NTLK] Getting MP2100 setup on Wifi

From: Joe Breuer <joebreuer_at_gmail.com>
Date: Sat Jan 19 2008 - 22:38:24 EST

Scott,
  I downloaded NewtonWaveLAN_source.zip and installed LucentWaveLAN.pkg on
the Internal Store.
When I plug in the Wifi card I get the following message.
"There is a problem with this card.(Newton cannot recognize this type of
card"

The card is a ORiNOCO 802.11b Gold .

I notice on the back it has Model 8420-WD. It has 5v 16bit checked. I'm
still not certain if this is the correct card for the newton.

Any ideas were I go from here ?

On 1/20/08, Scott Rogers <srogers@gmail.com> wrote:
>
> Joe,
>
> Go here:
>
> http://www.ff.iij4u.or.jp/~ngc/eng/newtwave.htm
>
> And download the zip file.
>
> Inside it, there will be the wifi driver and a folder with another
> copy of the driver. Install that one, not the first one.
>
> Plug in the card and set it up according to the menus.
>
> Works best on an unencrypted network.
>
> ====================================================================
> The NewtonTalk Mailing List - http://www.newtontalk.net/
> The Official Newton FAQ - http://www.splorp.com/newton/faq/
> The Newton Glossary - http://www.splorp.com/newton/glossary/
> WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
> ====================================================================
>
>
>
>

====================================================================
The NewtonTalk Mailing List - http://www.newtontalk.net/
The Official Newton FAQ - http://www.splorp.com/newton/faq/
The Newton Glossary - http://www.splorp.com/newton/glossary/
WikiWikiNewt - http://tools.unna.org/wikiwikinewt/
====================================================================
Received on Sat Jan 19 22:38:25 2008

This archive was generated by hypermail 2.1.8 : Sun Jan 20 2008 - 01:30:00 EST