Re: [NTLK] Dock via the Internal SER-01 port on the 2100

I think all you need would be the correct newton to pc (mini-din8 to
db9) serial cable/adapter.

I have one available on my store at cheap, please take a look.

Adriano

http://notwen.com

23/ott/06 Steve Hammond wrote:

> You are exactly right. My Keyspan USB/PDA adaptor is not compatible
> with the Newton serial one.
>
> To prove it, I had plugged my 2100 into a serial port of my beige G3,
> and use Newten to transfert packages, and it worked perfectly. So the
> problem is really between the adaptor and the 2100 serial board.
>
> Thanks
>
> Le 06-10-23 à 05:18, Adriano a écrit :
>
>> Hi Steve,
>>
>> your problem may depend mainly to the usb adapter you are using,
>> or also to which type of serial cable your setup is connected to.
>> Infact if you own a serial pass-through cable, often used to connect
>> to fax/modems,
>> you should then configure your usb adapter to accept modem
>> connections.

-- 
This is the NewtonTalk list - http://www.newtontalk.net/ for all inquiries
Official Newton FAQ: http://www.chuma.org/newton/faq/
WikiWikiNewt for all kinds of articles: http://tools.unna.org/wikiwikinewt/