Re: [NTLK] WaveLan won't fit

From: John Ruschmeyer (jruschme_at_comcast.net)
Date: Thu Oct 17 2002 - 13:27:42 EDT


On Wed, 2002-10-16 at 23:30, Mick Ring wrote:
>
> I got my Orinoco Silver today and it won't fit in my Newton. I slide it in
> and when it gets to the points where the pins would slip into the card, I
> can't push it any further. I hesitate to force it in for fear of bending the
> pins on my Newton.

Which slot? Have you tried it in the other one?

> It seems like the holes on the Lucent card are smaller than the holes on my
> memory cards. The Lucent holes are also circular, while the memory card
> holes are square.
>
> Anybody else seen this problem?

No, but I've noticed that, on mine, the upper slot has a much greater
tolerance. Therefore, I keep the memory card in the lower slot and swap
between modem and ethernet cards in the upper one.

<<<john>>>

-- 
Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
Read the Newton FAQ: http://www.chuma.org/newton/faq/
This is the NewtonTalk mailing list - http://www.newtontalk.net/



This archive was generated by hypermail 2.1.2 : Thu Oct 31 2002 - 12:02:56 EST