Re: [NTLK] Newton 4 Newbies/dead 2100

From: Joshua Johnston (flagg_at_midmaine.com)
Date: Thu Jun 27 2002 - 01:21:23 EDT


You've been reading way too much Herbert "H-Dog" Kornfeld, Mackey. :)

-----Original Message-----
From: newtontalk-bounce_at_newtontalk.net
[mailto:newtontalk-bounce_at_newtontalk.net] On Behalf Of James Mackey
Sent: Thursday, June 27, 2002 1:03 AM
To: newtontalk_at_newtontalk.net
Subject: Re: [NTLK] Newton 4 Newbies/dead 2100

 

Thanks, G. At my firs bes opp-o-tunity I be bustin' out w' da hot poker
and
disconnectin' dat broke-ass ova-priced Newtin'-killin' rip off. Maybe I
bes
be gettin' my fix at Radio Shack afta all. I wus about to thro' that
non-working ting unda my sled while cruisin' down da alley.

J

>From: Ed Kummel >Reply-To: newtontalk_at_newtontalk.net >To:
newtontalk_at_newtontalk.net >Subject: Re: [NTLK] Newton 4 Newbies/dead
2100
>Date: Wed, 26 Jun 2002 21:30:20 -0700 (PDT) >>>I've found that a
disconnected crystal will give the >perception that the newt is dead...
I
raninto this >problem with my "getto" acelleration. (one of the door
>clippy
things pushed on the crystal and broke a solder >joint, hence, no newton
in
slow mode, newton only in >fast mode) >In your case, since you're using
one
of those >hi-faloot'n PixSolution boards is that you probably >lost a
solder
connection at the crystal's pad or the >wire or at the acelleration
board.
That's where I >would check first... >Ed >web/gadget guru >>--- James
Mackey
wrote: >>>>>>I had an Implant accel and an SER-001 in it. The
>>flip-cover
would not stay >>back in the locked position (imperceptable bulge of
>>the
back case) so I was >>experimenting with several alternate locaitons for
>>the accelerator. So now >>the Newt won't boot, and it failed to
recover
after >>an overnight hiatus >>(following the instructions on the FAQ). I
don't >>know if anything inside >>might have touched and caused the
problem.
Maybe I >>was too greedy. That Newt >>was my skanky daily driver, and it
would be nice if >>it could be recovered. >>All the internal connectors
are
still secure and I >>removed and reinstalled >>the PCB card and SER-001
without any luck. I might >>try de-soldering the >>Implant and putting
the
old crystal back to see if >>it was the part that >>failed. >>>>JM
>>>>>From:James Elliott >Reply-To: >>newtontalk_at_newtontalk.net >To:
>>newtontalk_at_newtontalk.net >Subject: Re: [NTLK] >>Newton 4 Newbies site
>Date: >>Wed, 26 Jun 2002 19:22:16 -0400 >>>What sort of >>hotrodding
were
you up to? >>>>-James >>>It looks like quite a useful site. The >>J&K
Sales
link will come >>in handy. I >>need to get another 2100 after I
>>murdered
one of mine >>yesterday. I was >>probably asking for trouble by
>>hotrodding
the hardware >>toomuch. >>>>JM >>>-- >Read the List FAQ/Etiquette:
>>http://www.newtontalk.net/faq.html >Read the Newton >>FAQ:
>>http://www.guns-media.com/mirrors/newton/faq/ >This >>is the
NewtonTalk
>>mailinglist - http://www.newtontalk.net >>>>>>===== >"I believe that
viewers who skip television commercials are Thieves who are guilty of
Stealing network programming" >- Jamie Keller CEO/Chairman Turner
Broadcasting >>__________________________________________________ >Do
You
Yahoo!? >Yahoo! - Official partner of 2002 FIFA World Cup
>http://fifaworldcup.yahoo.com >>-- >Read the List FAQ/Etiquette:
http://www.newtontalk.net/faq.html >Read the Newton FAQ:
http://www.guns-media.com/mirrors/newton/faq/ >This is the NewtonTalk
mailinglist - http://www.newtontalk.net

------------------------------------------------------------------------

----
Send and receive Hotmail on your mobile device: Click Here[1]

--- Links --- 1 'http://g.msn.com/1HM505401/45' -- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net

-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net



This archive was generated by hypermail 2.1.2 : Wed Jul 03 2002 - 14:03:01 EDT