Dunno if anyone's found thsi out before but...
I got my Newton 2100 from the U.S. (I'm in the U.K.) and unfortunately the
screen calibration is out (the top and bottom of the screen are okay but the
middle section draws the ink about 3 mm above where the pen is). However,
I've found that by cheating during the screen calibration process you can
make it all work nicely. Basically for the top left tap I tap just above the
cross, same for the bottm fight tap and then for the middle one I tap just
below the cross (about 2 mm below). Everything calibrated! (well, not
perfect but good enough).
Brad
P.S. If anyone has any suggestions as to how to achieve perfect calibration
again I'd love to know!
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe
This archive was generated by hypermail 2.1.2 : Sat Mar 02 2002 - 10:03:44 EST