Re: [NTLK] Hi everyone

From: Laurent Daudelin (laurent_daudelin_at_fanniemae.com)
Date: Fri Feb 22 2002 - 10:50:00 EST


On 22/02/02 10:44, "Smith, Bradley" <bradley.smith_at_artisansw.com> wrote:

> I've spent the last year (roughly) playing around with a Psion 3, and a
> Psion 5. I currently have a Palm m500 and did have a Messagepad 120 for a
> while (too slow). However, as many of you probably already know, the only
> PDA worth having is a newton and I realise dthis last week and bought one
> from the gool ol' U S of A. The screen calibration is a bit off but I've
> managed to compensate during the calibration setup and everything is
> working well!
>
> Anyway, back the the point, I will soon get an ethernet card but until then
> I want to get internet access at work by connecting to my work PC (win2k)
> and my newton's serial connection. I've got RAS setup and NIE installed on
> the newt but it's not working at the moment. The only website I've found
> with details is in French and I'm a bit of an ignoramous when it comes to
> foreign languages. The babelfish translation of the website was, how can I
> put it, less than perfect.
>
> Brad
>
>> Hi Brad! Glad to see you back! What brought you in?
>>
>> Sorry, I can offer any help. I don't really understand what
>> you're trying to
>> do. Why not using an old, regular modem for a serial connection to the
>> Internet? Or a cheap Ethernet card for a network hookup?

Direct me to the French website, and with the initial Babelfish translation,
je peux peut-etre vous aider...

-Laurent.

-- 
=====================================================================
Laurent Daudelin              Developer, Multifamily, ESO, Fannie Mae
mailto:Laurent_Daudelin_at_fanniemae.com             Washington, DC, USA
********************** Usual disclaimers apply **********************
fat electrons n.: Old-time hacker David Cargill's theory on the causation of
computer glitches. Your typical electric utility draws its line current out
of the big generators with a pair of coil taps located near the top of the
dynamo. When the normal tap brushes get dirty, they take them off line to
clean them up, and use special auxiliary taps on the bottom of the coil.
Now, this is a problem, because when they do that they get not ordinary or
`thin' electrons, but the fat'n'sloppy electrons that are heavier and so
settle to the bottom of the generator. These flow down ordinary wires just
fine, but when they have to turn a sharp corner (as in an integrated-circuit
via), they're apt to get stuck. This is what causes computer glitches.

-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe or manage: visit the above link or mailto:newtontalk-request_at_newtontalk.net?Subject=unsubscribe



This archive was generated by hypermail 2.1.2 : Sat Mar 02 2002 - 10:03:34 EST