> The screw does fit. It is quite possible that, due to your previous
> installation, the
> plastic debris formed when the thread cut, is blocking the bottom of the
> hole??
Of course this is most probably the case and would explain that I was not
able to easily screw in the long screw. And of course I was careful with my
green friend and did not try to apply brute force.
> SNIP
> The reason I didn't include any overclocking circuitry is so that
> the design I have developed to do this would be available to anyone
whether they
> had fitted a SER-001 or not. There are other technical reasons too.
>
> Be on the lookout for my overclocking solution in the near future.
>
> Thanks for the report.
>
You are welcome.
I am looking forward to see more about your overclocking solution and it is
surely no secret that I will be on the list of interested people.
Johannes.
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Sun May 05 2002 - 14:04:26 EDT