Hi Sacha,
I live in Holland as well and have a Nokia 6210 (which is not a fancy
phone).
I tried to use it (via serial connection) for getting Internet access, but
is is way to slow (9,6 kBps, because the dutch providers do not support
HSCSD which would allow up to 56 kBps...)
The point is that the phone needs a built in modem.
If it has you can write an application that allows you to dial from your
Newt directly using the serial commands.
Unfortunately the IR connection does not work at the moment because of the
protocols used on both sides are different. But maybe this problem will be
solved by means of a new Newton IR driver software.
For SMS I use NewtSMS (www.team-auweiler.de), which is absolutely great and
testsed for various phones, Nokia and Siemens as well.
In order to integrate the phone perfectly probably you would need the Nokia
card phone...
Johannes
> -----Original Message-----
> From: newtontalk-bounce_at_newtontalk.net
> [mailto:newtontalk-bounce_at_newtontalk.net]On Behalf Of Sacha
> Sent: Monday, April 01, 2002 12:15 AM
> To: newtontalk_at_newtontalk.net
> Subject: [NTLK] MP2000 and mobile phone
>
>
>
> Hello, list,
>
> This is a question for european users: I live in Holland and
> would like to=
> =20
> know wich hw/sw solutions are a best fit to do the following:
> - I would like to use the MP2k as a dialer and to prepare SMS for
> a mobile=
> =20
> phone (cool way to phone: dial from the Newton and use a headset
> to talk,=20
> hide the phone in your pocket)
> - I would like to use the build-in application "Names" to dial (also to=20
> fill the phones internal adresbook with phone numbers and names)
> - If it's another application: I would like to log the length of
> teh call=20
> and assign costs according to the time called
> - The Newton should be able to display incoming calls and SMS-messages
> - I would like to use the serial port to dial (not a must)
> - I have a Siemens M35-phone, and I could use a Nokia 3210
> instead (I do=20
> not need fancy phones). Any other - cheap - solution is welcome
> - And finally: where could I get the necessary hw/sw
>
> Thanks
>
> Sa=9Aa
>
>
> --
> Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html
> Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/
> This is the NewtonTalk mailing list - http://www.newtontalk.net
>
>
-- Read the List FAQ/Etiquette: http://www.newtontalk.net/faq.html Read the Newton FAQ: http://www.guns-media.com/mirrors/newton/faq/ This is the NewtonTalk mailing list - http://www.newtontalk.net
This archive was generated by hypermail 2.1.2 : Sun May 05 2002 - 14:02:06 EDT