From: Andre Beckedorf (Newton_at_Beckedorf.net)
Date: Thu Jun 14 2001 - 15:38:46 PDT
I also own a D-Link 660 ethernet adapter and it works in accelerated mode
with the PixSolution Implant 2000.
Regards,
Andre Beckedorf
----- Original Message -----
From: "Woo Lee" <vitcitylb_at_earthlink.net>
To: <newtontalk_at_newtontalk.net>
Sent: Thursday, June 14, 2001 10:47 PM
Subject: [NTLK] Re: Emate speedup
> So far, only two ethernet cards work. The D-Link 660 and one other that
somebody else posted.
> Serial and IrDA should both be unable to connect, but back to reg. speed
there should be no problems.
> ------------------
> >Now the bad news. I cannot get either of them to work with my Ethernet
card
> >(3com 589d), while in fast-mode. Also the serial port does not seem to
> >work. However, I have a 56k modem card which does work while in
fast-mode,
> >and memory cards work. Also, sound is sped up, so if you use sound icons
or
> >mod files, they sound a little like the chipmunks. These two reasons are
> >why the switch is needed, so you can 'downshift' when you need to use the
> >dock etc. then speed up for normal use.
> ------------------
>
> !ooW %-)
>
>
> --
> This is the Newtontalk mailinglist - http://www.newtontalk.net
> To unsubscribe: newtontalk-request_at_newtontalk.net with 'unsubscribe' in
> the BODY. Unsubscribe messages sent to the list will be filtered.
>
-- This is the Newtontalk mailinglist - http://www.newtontalk.net To unsubscribe: newtontalk-request_at_newtontalk.net with 'unsubscribe' in the BODY. Unsubscribe messages sent to the list will be filtered.
This archive was generated by hypermail 2.1.5 : Sat Mar 08 2003 - 11:37:02 PST